661 lines
24 KiB
C
661 lines
24 KiB
C
/**
|
|
* Copyright (c) 2015 - 2020, Nordic Semiconductor ASA
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#ifndef NRF_DRV_UART_H__
|
|
#define NRF_DRV_UART_H__
|
|
|
|
#include <nrfx.h>
|
|
|
|
#if defined(UARTE_PRESENT) && NRFX_CHECK(NRFX_UARTE_ENABLED)
|
|
#define NRF_DRV_UART_WITH_UARTE
|
|
#endif
|
|
#if defined(UART_PRESENT) && NRFX_CHECK(NRFX_UART_ENABLED)
|
|
#define NRF_DRV_UART_WITH_UART
|
|
#endif
|
|
|
|
#if defined(NRF_DRV_UART_WITH_UARTE)
|
|
#include <nrfx_uarte.h>
|
|
#define NRF_DRV_UART_CREATE_UARTE(id) \
|
|
.uarte = NRFX_UARTE_INSTANCE(id),
|
|
#else
|
|
// Compilers (at least the smart ones) will remove the UARTE related code
|
|
// (blocks starting with "if (NRF_DRV_UART_USE_UARTE)") when it is not used,
|
|
// but to perform the compilation they need the following definitions.
|
|
#define nrfx_uarte_init(...) 0
|
|
#define nrfx_uarte_uninit(...)
|
|
#define nrfx_uarte_task_address_get(...) 0
|
|
#define nrfx_uarte_event_address_get(...) 0
|
|
#define nrfx_uarte_tx(...) 0
|
|
#define nrfx_uarte_tx_in_progress(...) 0
|
|
#define nrfx_uarte_tx_abort(...)
|
|
#define nrfx_uarte_rx(...) 0
|
|
#define nrfx_uarte_rx_ready(...) 0
|
|
#define nrfx_uarte_rx_abort(...)
|
|
#define nrfx_uarte_errorsrc_get(...) 0
|
|
#define NRF_DRV_UART_CREATE_UARTE(id)
|
|
#endif
|
|
|
|
#if defined(NRF_DRV_UART_WITH_UART)
|
|
#include <nrfx_uart.h>
|
|
|
|
#define NRF_DRV_UART_CREATE_UART(id) _NRF_DRV_UART_CREATE_UART(id)
|
|
#define _NRF_DRV_UART_CREATE_UART(id) NRF_DRV_UART_CREATE_UART_##id
|
|
#define NRF_DRV_UART_CREATE_UART_0 \
|
|
.uart = NRFX_UART_INSTANCE(0),
|
|
#define NRF_DRV_UART_CREATE_UART_1 \
|
|
.uart = { .p_reg = NULL },
|
|
|
|
#else
|
|
// Compilers (at least the smart ones) will remove the UART related code
|
|
// (blocks starting with "if (NRF_DRV_UART_USE_UART)") when it is not used,
|
|
// but to perform the compilation they need the following definitions.
|
|
#define nrfx_uart_init(...) 0
|
|
#define nrfx_uart_uninit(...)
|
|
#define nrfx_uart_task_address_get(...) 0
|
|
#define nrfx_uart_event_address_get(...) 0
|
|
#define nrfx_uart_tx(...) 0
|
|
#define nrfx_uart_tx_in_progress(...) 0
|
|
#define nrfx_uart_tx_abort(...)
|
|
#define nrfx_uart_rx(...) 0
|
|
#define nrfx_uart_rx_enable(...)
|
|
#define nrfx_uart_rx_disable(...)
|
|
#define nrfx_uart_rx_ready(...) 0
|
|
#define nrfx_uart_rx_abort(...)
|
|
#define nrfx_uart_errorsrc_get(...) 0
|
|
#define NRF_DRV_UART_CREATE_UART(id)
|
|
|
|
// This part is for old modules that use directly UART HAL definitions
|
|
// (to make them compilable for chips that have only UARTE).
|
|
#define NRF_UART_BAUDRATE_1200 NRF_UARTE_BAUDRATE_1200
|
|
#define NRF_UART_BAUDRATE_2400 NRF_UARTE_BAUDRATE_2400
|
|
#define NRF_UART_BAUDRATE_4800 NRF_UARTE_BAUDRATE_4800
|
|
#define NRF_UART_BAUDRATE_9600 NRF_UARTE_BAUDRATE_9600
|
|
#define NRF_UART_BAUDRATE_14400 NRF_UARTE_BAUDRATE_14400
|
|
#define NRF_UART_BAUDRATE_19200 NRF_UARTE_BAUDRATE_19200
|
|
#define NRF_UART_BAUDRATE_28800 NRF_UARTE_BAUDRATE_28800
|
|
#define NRF_UART_BAUDRATE_38400 NRF_UARTE_BAUDRATE_38400
|
|
#define NRF_UART_BAUDRATE_57600 NRF_UARTE_BAUDRATE_57600
|
|
#define NRF_UART_BAUDRATE_76800 NRF_UARTE_BAUDRATE_76800
|
|
#define NRF_UART_BAUDRATE_115200 NRF_UARTE_BAUDRATE_115200
|
|
#define NRF_UART_BAUDRATE_230400 NRF_UARTE_BAUDRATE_230400
|
|
#define NRF_UART_BAUDRATE_250000 NRF_UARTE_BAUDRATE_250000
|
|
#define NRF_UART_BAUDRATE_460800 NRF_UARTE_BAUDRATE_460800
|
|
#define NRF_UART_BAUDRATE_921600 NRF_UARTE_BAUDRATE_921600
|
|
#define NRF_UART_BAUDRATE_1000000 NRF_UARTE_BAUDRATE_1000000
|
|
typedef nrf_uarte_baudrate_t nrf_uart_baudrate_t;
|
|
#define NRF_UART_ERROR_OVERRUN_MASK NRF_UARTE_ERROR_OVERRUN_MASK
|
|
#define NRF_UART_ERROR_PARITY_MASK NRF_UARTE_ERROR_PARITY_MASK
|
|
#define NRF_UART_ERROR_FRAMING_MASK NRF_UARTE_ERROR_PARITY_MASK
|
|
#define NRF_UART_ERROR_BREAK_MASK NRF_UARTE_ERROR_BREAK_MASK
|
|
typedef nrf_uarte_error_mask_t nrf_uart_error_mask_t;
|
|
#define NRF_UART_HWFC_DISABLED NRF_UARTE_HWFC_DISABLED
|
|
#define NRF_UART_HWFC_ENABLED NRF_UARTE_HWFC_ENABLED
|
|
typedef nrf_uarte_hwfc_t nrf_uart_hwfc_t;
|
|
#define NRF_UART_PARITY_EXCLUDED NRF_UARTE_PARITY_EXCLUDED
|
|
#define NRF_UART_PARITY_INCLUDED NRF_UARTE_PARITY_INCLUDED
|
|
typedef nrf_uarte_parity_t nrf_uart_parity_t;
|
|
typedef nrf_uarte_task_t nrf_uart_task_t;
|
|
typedef nrf_uarte_event_t nrf_uart_event_t;
|
|
#define NRF_UART_PSEL_DISCONNECTED NRF_UARTE_PSEL_DISCONNECTED
|
|
#define nrf_uart_event_clear(...)
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @defgroup nrf_drv_uart UART driver - legacy layer
|
|
* @{
|
|
* @ingroup nrf_uart
|
|
* @brief Layer providing compatibility with the former API.
|
|
*/
|
|
|
|
/**
|
|
* @brief Structure for the UART driver instance.
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint8_t inst_idx;
|
|
#if defined(NRF_DRV_UART_WITH_UARTE)
|
|
nrfx_uarte_t uarte;
|
|
#endif
|
|
#if defined(NRF_DRV_UART_WITH_UART)
|
|
nrfx_uart_t uart;
|
|
#endif
|
|
} nrf_drv_uart_t;
|
|
|
|
/**
|
|
* @brief Macro for creating an UART driver instance.
|
|
*/
|
|
#define NRF_DRV_UART_INSTANCE(id) \
|
|
{ \
|
|
.inst_idx = id, \
|
|
NRF_DRV_UART_CREATE_UARTE(id) \
|
|
NRF_DRV_UART_CREATE_UART(id) \
|
|
}
|
|
|
|
/**
|
|
* @brief Types of UART driver events.
|
|
*/
|
|
typedef enum
|
|
{
|
|
NRF_DRV_UART_EVT_TX_DONE, ///< Requested TX transfer completed.
|
|
NRF_DRV_UART_EVT_RX_DONE, ///< Requested RX transfer completed.
|
|
NRF_DRV_UART_EVT_ERROR, ///< Error reported by UART peripheral.
|
|
} nrf_drv_uart_evt_type_t;
|
|
|
|
/**@brief Structure for UART configuration. */
|
|
typedef struct
|
|
{
|
|
uint32_t pseltxd; ///< TXD pin number.
|
|
uint32_t pselrxd; ///< RXD pin number.
|
|
uint32_t pselcts; ///< CTS pin number.
|
|
uint32_t pselrts; ///< RTS pin number.
|
|
void * p_context; ///< Context passed to interrupt handler.
|
|
nrf_uart_hwfc_t hwfc; ///< Flow control configuration.
|
|
nrf_uart_parity_t parity; ///< Parity configuration.
|
|
nrf_uart_baudrate_t baudrate; ///< Baudrate.
|
|
uint8_t interrupt_priority; ///< Interrupt priority.
|
|
#if defined(NRF_DRV_UART_WITH_UARTE) && defined(NRF_DRV_UART_WITH_UART)
|
|
bool use_easy_dma;
|
|
#endif
|
|
} nrf_drv_uart_config_t;
|
|
|
|
#if defined(NRF_DRV_UART_WITH_UARTE) && defined(NRF_DRV_UART_WITH_UART)
|
|
extern uint8_t nrf_drv_uart_use_easy_dma[];
|
|
#define NRF_DRV_UART_DEFAULT_CONFIG_USE_EASY_DMA .use_easy_dma = true,
|
|
#else
|
|
#define NRF_DRV_UART_DEFAULT_CONFIG_USE_EASY_DMA
|
|
#endif
|
|
|
|
/**@brief UART default configuration. */
|
|
#define NRF_DRV_UART_DEFAULT_CONFIG \
|
|
{ \
|
|
.pseltxd = NRF_UART_PSEL_DISCONNECTED, \
|
|
.pselrxd = NRF_UART_PSEL_DISCONNECTED, \
|
|
.pselcts = NRF_UART_PSEL_DISCONNECTED, \
|
|
.pselrts = NRF_UART_PSEL_DISCONNECTED, \
|
|
.p_context = NULL, \
|
|
.hwfc = (nrf_uart_hwfc_t)UART_DEFAULT_CONFIG_HWFC, \
|
|
.parity = (nrf_uart_parity_t)UART_DEFAULT_CONFIG_PARITY, \
|
|
.baudrate = (nrf_uart_baudrate_t)UART_DEFAULT_CONFIG_BAUDRATE, \
|
|
.interrupt_priority = UART_DEFAULT_CONFIG_IRQ_PRIORITY, \
|
|
NRF_DRV_UART_DEFAULT_CONFIG_USE_EASY_DMA \
|
|
}
|
|
|
|
/**@brief Structure for UART transfer completion event. */
|
|
typedef struct
|
|
{
|
|
uint8_t * p_data; ///< Pointer to memory used for transfer.
|
|
uint8_t bytes; ///< Number of bytes transfered.
|
|
} nrf_drv_uart_xfer_evt_t;
|
|
|
|
/**@brief Structure for UART error event. */
|
|
typedef struct
|
|
{
|
|
nrf_drv_uart_xfer_evt_t rxtx; ///< Transfer details includes number of bytes transfered.
|
|
uint32_t error_mask;///< Mask of error flags that generated the event.
|
|
} nrf_drv_uart_error_evt_t;
|
|
|
|
/**@brief Structure for UART event. */
|
|
typedef struct
|
|
{
|
|
nrf_drv_uart_evt_type_t type; ///< Event type.
|
|
union
|
|
{
|
|
nrf_drv_uart_xfer_evt_t rxtx; ///< Data provided for transfer completion events.
|
|
nrf_drv_uart_error_evt_t error;///< Data provided for error event.
|
|
} data;
|
|
} nrf_drv_uart_event_t;
|
|
|
|
/**
|
|
* @brief UART interrupt event handler.
|
|
*
|
|
* @param[in] p_event Pointer to event structure. Event is allocated on the stack so it is available
|
|
* only within the context of the event handler.
|
|
* @param[in] p_context Context passed to interrupt handler, set on initialization.
|
|
*/
|
|
typedef void (*nrf_uart_event_handler_t)(nrf_drv_uart_event_t * p_event, void * p_context);
|
|
|
|
/**
|
|
* @brief Function for initializing the UART driver.
|
|
*
|
|
* This function configures and enables UART. After this function GPIO pins are controlled by UART.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
* @param[in] p_config Initial configuration.
|
|
* @param[in] event_handler Event handler provided by the user. If not provided driver works in
|
|
* blocking mode.
|
|
*
|
|
* @retval NRFX_SUCCESS If initialization was successful.
|
|
* @retval NRFX_ERROR_INVALID_STATE If driver is already initialized.
|
|
*/
|
|
ret_code_t nrf_drv_uart_init(nrf_drv_uart_t const * p_instance,
|
|
nrf_drv_uart_config_t const * p_config,
|
|
nrf_uart_event_handler_t event_handler);
|
|
|
|
/**
|
|
* @brief Function for uninitializing the UART driver.
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*/
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_uninit(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for getting the address of a specific UART task.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
* @param[in] task Task.
|
|
*
|
|
* @return Task address.
|
|
*/
|
|
__STATIC_INLINE
|
|
uint32_t nrf_drv_uart_task_address_get(nrf_drv_uart_t const * p_instance,
|
|
nrf_uart_task_t task);
|
|
|
|
/**
|
|
* @brief Function for getting the address of a specific UART event.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
* @param[in] event Event.
|
|
*
|
|
* @return Event address.
|
|
*/
|
|
__STATIC_INLINE
|
|
uint32_t nrf_drv_uart_event_address_get(nrf_drv_uart_t const * p_instance,
|
|
nrf_uart_event_t event);
|
|
|
|
/**
|
|
* @brief Function for sending data over UART.
|
|
*
|
|
* If an event handler was provided in nrf_drv_uart_init() call, this function
|
|
* returns immediately and the handler is called when the transfer is done.
|
|
* Otherwise, the transfer is performed in blocking mode, i.e. this function
|
|
* returns when the transfer is finished. Blocking mode is not using interrupt so
|
|
* there is no context switching inside the function.
|
|
*
|
|
* @note Peripherals using EasyDMA (i.e. UARTE) require that the transfer buffers
|
|
* are placed in the Data RAM region. If they are not and UARTE instance is
|
|
* used, this function will fail with error code NRFX_ERROR_INVALID_ADDR.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
* @param[in] p_data Pointer to data.
|
|
* @param[in] length Number of bytes to send.
|
|
*
|
|
* @retval NRFX_SUCCESS If initialization was successful.
|
|
* @retval NRFX_ERROR_BUSY If driver is already transferring.
|
|
* @retval NRFX_ERROR_FORBIDDEN If the transfer was aborted from a different context
|
|
* (blocking mode only, also see @ref nrf_drv_uart_rx_disable).
|
|
* @retval NRFX_ERROR_INVALID_ADDR If p_data does not point to RAM buffer (UARTE only).
|
|
*/
|
|
__STATIC_INLINE
|
|
ret_code_t nrf_drv_uart_tx(nrf_drv_uart_t const * p_instance,
|
|
uint8_t const * const p_data,
|
|
uint8_t length);
|
|
|
|
/**
|
|
* @brief Function for checking if UART is currently transmitting.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*
|
|
* @retval true If UART is transmitting.
|
|
* @retval false If UART is not transmitting.
|
|
*/
|
|
__STATIC_INLINE
|
|
bool nrf_drv_uart_tx_in_progress(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for aborting any ongoing transmission.
|
|
* @note @ref NRF_DRV_UART_EVT_TX_DONE event will be generated in non-blocking mode. Event will
|
|
* contain number of bytes sent until abort was called. If Easy DMA is not used event will be
|
|
* called from the function context. If Easy DMA is used it will be called from UART interrupt
|
|
* context.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*/
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_tx_abort(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for receiving data over UART.
|
|
*
|
|
* If an event handler was provided in the nrf_drv_uart_init() call, this function
|
|
* returns immediately and the handler is called when the transfer is done.
|
|
* Otherwise, the transfer is performed in blocking mode, i.e. this function
|
|
* returns when the transfer is finished. Blocking mode is not using interrupt so
|
|
* there is no context switching inside the function.
|
|
* The receive buffer pointer is double buffered in non-blocking mode. The secondary
|
|
* buffer can be set immediately after starting the transfer and will be filled
|
|
* when the primary buffer is full. The double buffering feature allows
|
|
* receiving data continuously.
|
|
*
|
|
* @note Peripherals using EasyDMA (i.e. UARTE) require that the transfer buffers
|
|
* are placed in the Data RAM region. If they are not and UARTE driver instance
|
|
* is used, this function will fail with error code NRFX_ERROR_INVALID_ADDR.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
* @param[in] p_data Pointer to data.
|
|
* @param[in] length Number of bytes to receive.
|
|
*
|
|
* @retval NRFX_SUCCESS If initialization was successful.
|
|
* @retval NRFX_ERROR_BUSY If the driver is already receiving
|
|
* (and the secondary buffer has already been set
|
|
* in non-blocking mode).
|
|
* @retval NRFX_ERROR_FORBIDDEN If the transfer was aborted from a different context
|
|
* (blocking mode only, also see @ref nrf_drv_uart_rx_disable).
|
|
* @retval NRFX_ERROR_INTERNAL If UART peripheral reported an error.
|
|
* @retval NRFX_ERROR_INVALID_ADDR If p_data does not point to RAM buffer (UARTE only).
|
|
*/
|
|
__STATIC_INLINE
|
|
ret_code_t nrf_drv_uart_rx(nrf_drv_uart_t const * p_instance,
|
|
uint8_t * p_data,
|
|
uint8_t length);
|
|
|
|
|
|
|
|
/**
|
|
* @brief Function for testing the receiver state in blocking mode.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*
|
|
* @retval true If the receiver has at least one byte of data to get.
|
|
* @retval false If the receiver is empty.
|
|
*/
|
|
__STATIC_INLINE
|
|
bool nrf_drv_uart_rx_ready(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for enabling the receiver.
|
|
*
|
|
* UART has a 6-byte-long RX FIFO and it is used to store incoming data. If a user does not call the
|
|
* UART receive function before the FIFO is filled, an overrun error will appear. Enabling the receiver
|
|
* without specifying an RX buffer is supported only in UART mode (without Easy DMA). The receiver must be
|
|
* explicitly closed by the user @sa nrf_drv_uart_rx_disable. This function asserts if the mode is wrong.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*/
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_rx_enable(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for disabling the receiver.
|
|
*
|
|
* This function must be called to close the receiver after it has been explicitly enabled by
|
|
* @sa nrf_drv_uart_rx_enable. The feature is supported only in UART mode (without Easy DMA). The function
|
|
* asserts if mode is wrong.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*/
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_rx_disable(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for aborting any ongoing reception.
|
|
* @note @ref NRF_DRV_UART_EVT_RX_DONE event will be generated in non-blocking mode. The event will
|
|
* contain the number of bytes received until abort was called. The event is called from UART interrupt
|
|
* context.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*/
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_rx_abort(nrf_drv_uart_t const * p_instance);
|
|
|
|
/**
|
|
* @brief Function for reading error source mask. Mask contains values from @ref nrf_uart_error_mask_t.
|
|
* @note Function should be used in blocking mode only. In case of non-blocking mode, an error event is
|
|
* generated. Function clears error sources after reading.
|
|
*
|
|
* @param[in] p_instance Pointer to the driver instance structure.
|
|
*
|
|
* @retval Mask of reported errors.
|
|
*/
|
|
__STATIC_INLINE
|
|
uint32_t nrf_drv_uart_errorsrc_get(nrf_drv_uart_t const * p_instance);
|
|
|
|
|
|
#ifndef SUPPRESS_INLINE_IMPLEMENTATION
|
|
|
|
#if defined(NRF_DRV_UART_WITH_UARTE) && defined(NRF_DRV_UART_WITH_UART)
|
|
#define NRF_DRV_UART_USE_UARTE (nrf_drv_uart_use_easy_dma[p_instance->inst_idx])
|
|
#elif defined(NRF_DRV_UART_WITH_UARTE)
|
|
#define NRF_DRV_UART_USE_UARTE true
|
|
#else
|
|
#define NRF_DRV_UART_USE_UARTE false
|
|
#endif
|
|
#define NRF_DRV_UART_USE_UART (!NRF_DRV_UART_USE_UARTE)
|
|
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_uninit(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
nrfx_uarte_uninit(&p_instance->uarte);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
nrfx_uart_uninit(&p_instance->uart);
|
|
}
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
uint32_t nrf_drv_uart_task_address_get(nrf_drv_uart_t const * p_instance,
|
|
nrf_uart_task_t task)
|
|
{
|
|
uint32_t result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_task_address_get(&p_instance->uarte,
|
|
(nrf_uarte_task_t)task);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
result = nrfx_uart_task_address_get(&p_instance->uart, task);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
uint32_t nrf_drv_uart_event_address_get(nrf_drv_uart_t const * p_instance,
|
|
nrf_uart_event_t event)
|
|
{
|
|
uint32_t result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_event_address_get(&p_instance->uarte,
|
|
(nrf_uarte_event_t)event);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
result = nrfx_uart_event_address_get(&p_instance->uart, event);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
ret_code_t nrf_drv_uart_tx(nrf_drv_uart_t const * p_instance,
|
|
uint8_t const * p_data,
|
|
uint8_t length)
|
|
{
|
|
uint32_t result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_tx(&p_instance->uarte,
|
|
p_data,
|
|
length);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
result = nrfx_uart_tx(&p_instance->uart,
|
|
p_data,
|
|
length);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
bool nrf_drv_uart_tx_in_progress(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
bool result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_tx_in_progress(&p_instance->uarte);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
result = nrfx_uart_tx_in_progress(&p_instance->uart);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_tx_abort(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
nrfx_uarte_tx_abort(&p_instance->uarte);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
nrfx_uart_tx_abort(&p_instance->uart);
|
|
}
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
ret_code_t nrf_drv_uart_rx(nrf_drv_uart_t const * p_instance,
|
|
uint8_t * p_data,
|
|
uint8_t length)
|
|
{
|
|
uint32_t result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_rx(&p_instance->uarte,
|
|
p_data,
|
|
length);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
result = nrfx_uart_rx(&p_instance->uart,
|
|
p_data,
|
|
length);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
bool nrf_drv_uart_rx_ready(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
bool result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_rx_ready(&p_instance->uarte);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
result = nrfx_uart_rx_ready(&p_instance->uart);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_rx_enable(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
NRFX_ASSERT(false); // not supported
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
nrfx_uart_rx_enable(&p_instance->uart);
|
|
}
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_rx_disable(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
NRFX_ASSERT(false); // not supported
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
nrfx_uart_rx_disable(&p_instance->uart);
|
|
}
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
void nrf_drv_uart_rx_abort(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
nrfx_uarte_rx_abort(&p_instance->uarte);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
nrfx_uart_rx_abort(&p_instance->uart);
|
|
}
|
|
}
|
|
|
|
__STATIC_INLINE
|
|
uint32_t nrf_drv_uart_errorsrc_get(nrf_drv_uart_t const * p_instance)
|
|
{
|
|
uint32_t result = 0;
|
|
if (NRF_DRV_UART_USE_UARTE)
|
|
{
|
|
result = nrfx_uarte_errorsrc_get(&p_instance->uarte);
|
|
}
|
|
else if (NRF_DRV_UART_USE_UART)
|
|
{
|
|
nrf_uart_event_clear(p_instance->uart.p_reg, NRF_UART_EVENT_ERROR);
|
|
result = nrfx_uart_errorsrc_get(&p_instance->uart);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // SUPPRESS_INLINE_IMPLEMENTATION
|
|
|
|
/** @} */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // NRF_DRV_UART_H__
|