/********************************************************************
  Copyright (c) 2021 Xiangyu Medical Co.，Ltd. All rights reserved.
  FileName : IoControl.h
  Author   : zhangdawei
  Version  : V1.0
  Date     :
  Note     :
  History  :
********************************************************************/
#ifndef _IOCONTROL_H__
#define _IOCONTROL_H__
/* Includes ------------------------------------------------------*/
#include "nrf52.h"
#include "nrf_gpio.h"
#include "timer.h"
#include "drv_saadc.h"
#include "drv_uart.h"
#include "nrf_drv_gpiote.h"
//Log需要引用的头文件
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#include "nrf_delay.h"
/* Public define -------------------------------------------------*/
#define MERGE(Msb,Lsb)   ((Msb<<8)|Lsb)
/* 按键检测 */
#define KEY_PWR_SWITICH   ( 16 )

/* 电源锁定 */
#define KEY_POWER         ( 13 )
/* 指示灯 */
#define LED_YELLOW        ( 11 )
#define LED_WHITE         ( 12 )
/* DAC 引脚*/
#define PWM_DAC_GPIO      ( 26 )


/* 充电芯片引脚定义，低电平是充电中，高电平是充电完成或未充电 */
#define CHG_MANAGER_EN   ( 15 ) //充电管理芯片的EN引脚，内部200K下拉电阻。 高电平：禁用充电器  ，低电平（Low）或悬空（Floating）：启用充电器
#define CHG_MANAGER_PPR  ( 23 ) //充电管理芯片的PPR引脚 ，开漏输出，外部上拉3.0V，低电平：输入充电电压正常，高电平：输入充电电压异常
#define CHG_MANAGER_CHG  ( 14 ) //充电指示引脚，低电平是充电中，充电结束为高电平

#define STIM_RMS_RELAY_PIN          ( 27 )      // 肌电采集继电器控制引脚
#define STIM_RELAY_PIN              ( 28 )      //刺激继电器控制引脚 

#define SAMPLE_POWER_PIN            ( 20 )      //采样电源控制引脚

#define BOOST_DISCHARGE_PIN         ( 18 )      //boost升压放电引脚

#define BASE_WAVE_06_PIN            ( 6 )     //刺激基础波形控制引脚6
#define BASE_WAVE_07_PIN            ( 7 )     //刺激基础波形控制引脚7
#define BASE_WAVE_08_PIN            ( 8 )     //刺激基础波形控制引脚8

#define BOOST_VOLTAGE_CONTROL_PIN   ( 25 )     //boost电压控制引脚



/* Public typedef ------------------------------------------------*/
//设备开关机状态
typedef enum
{
    POWER_OPEN = 0,
    POWER_CLOSE
}DeviceStateInfo_e;
// 充电状态
typedef enum
{
    Uncharged = 0,
    Charging,
    ChargeComplete
}ChargingStateInfo_e;

typedef enum
{
	Bit_RESET = 0,
	Bit_SET
}BitAction;

typedef struct{
    nrf_drv_gpiote_pin_t KeyPinNumber;
    bool shineng;
}KeyStateInfo_t;
/* Public constants ----------------------------------------------*/
/* Public variables ----------------------------------------------*/
extern DeviceStateInfo_e DeviceState;
extern ChargingStateInfo_e ChargeState;
extern ChargingStateInfo_e ChargeLastState;
/* Public function prototypes ------------------------------------*/
void StartAdv(void);
void StopAdv(void);
void GpioInit(void);
void EXIT_KEY_Init(void);
void open_acquisition_relay(void);
void close_acquisition_relay(void);
void LedControl(void);
void StimStateInfoStructInit(SchemeData_t SchemeDataIn);
void VariableInit(void);
void StimOutCtlOpen(void);
void StimOutCtlClose(void);
void StimReleaseOpen(void);
void StimReleaseClose(void);
void PreStorageSchemeDataInit(void);
void KeyPinHandler(void);
void close_stimulate_relay(void);
void open_stimulate_relay(void);
#endif

/*************************** END OF FILE ***************************/