初始版本

external/infineon/optiga/include/optiga/common/ErrorCodes.h

@@ -0,0 +1,153 @@
+/**
+* MIT License
+*
+* Copyright (c) 2018 Infineon Technologies AG
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy
+* of this software and associated documentation files (the "Software"), to deal
+* in the Software without restriction, including without limitation the rights
+* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+* copies of the Software, and to permit persons to whom the Software is
+* furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all
+* copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE
+*
+*
+* \file
+*
+* \brief This file defines the error codes.
+*
+*
+*
+*/
+
+#ifndef _ERRORCODES_H_
+#define _ERRORCODES_H_
+
+/******************************************************************************
+* required includes
+* Setup common include order for the used types and definitions
+******************************************************************************/
+
+/******************************************************************************
+* ErrorCodes.h
+******************************************************************************/
+
+/******************************************************************************
+* defines
+******************************************************************************/
+
+/// Communication success
+#define E_COMMS_SUCCESS                     0x00000000
+
+/// Error code if protocol exit timeout has occurred
+#define E_COMMS_TIMEOUT_OCCURRED            0x80000003
+
+/// Error code if soft reset is not supported by slave
+#define E_COMMS_SOFT_RESET_NOT_SUPPORTED    0x80000005
+
+/// Error code if network layer channel does not mismatch with that of the slave
+#define E_COMMS_CHANNEL_NUM_MISMATCH		0x80000006
+
+/// Error code if packet size could not be set
+#define E_COMMS_PACKET_SIZE_NOT_SET			0x80000007
+
+/// Error code for invalid key
+#define E_COMMS_INVALID_KEY                 0x80000008
+
+/// Error code if the input parameter is NULL
+#define E_COMMS_PARAMETER_NULL              0x8000000A
+
+/// Error code for uninitialized protocol
+#define E_COMMS_PROTOCOL_NOT_INITIALIZED    0x8000000B
+
+/// Error code for wrong reset value
+#define E_INVALID_RESET_VALUE               0x8000000C
+
+///Error code for invalid value for a given key
+#define E_INVALID_VALUE_FOR_KEY             0x8000000D
+
+/// Error code for if the slave doesn't have any data ready
+#define E_COMMS_SLAVE_NODATA                0x8000000E
+
+/// Error code if no channel information is present
+#define E_COMMS_NO_CHANNEL_INFORMATION      0x8000000F
+
+/// Error code if APDU is not present
+#define E_COMMS_NO_APDU_PRESENT             0x80000010
+
+/// Error code for cold reset not supported
+#define  E_COMMS_COLD_RESET_NOT_SUPPORTED   0x80000011
+
+/// Error code for partial frame send
+#define  E_COMMS_PARTIAL_FRAME_SENT         0x80000012
+
+/// Error code for low level I2C write failed
+#define  E_COMMS_I2C_WRITE_FAILED           0x80000013
+
+/// Error code for low level I2C read failed
+#define  E_COMMS_I2C_READ_FAILED            0x80000014
+
+/// Error code for buffer size or memory insufficient
+#define  E_COMMS_INSUFFICIENT_BUF_SIZE      0x80000015
+
+/// Error code when the value of key is not set
+#define  E_COMMS_KEY_VALUE_NOT_SET          0x80000016
+
+/// Error code for setting a property within a session not allowed
+#define  E_COMMS_SET_PROPERTY_DENIED  		0x80000017
+
+/// Error code for opening the already opened protocol stack
+#define  E_COMMS_ALREADY_OPEN  		        0x80000018
+
+/// Error code for frame buffer overflow(at data link layer)
+#define  E_COMMS_FRAME_BUFFER_OVERFLOW      0x80000019
+
+/// Error code for unsupported functionality
+#define  E_COMMS_FUNCTION_NOT_SUPPORTED     0x8000001A
+
+/// Error code for invalid channel number
+#define  E_COMMS_INVALID_CHANNEL_NO			0x8000001B
+
+/// Error code for insufficient memory
+#define E_COMMS_INSUFFICIENT_MEMORY         0x8000001C
+
+/// Error code if Nack is received
+#define E_COMMS_I2C_NACK_RECEIVED           0x8000001D
+
+/// Error code for I2C Tx/Rx Error
+#define E_COMMS_I2C_TXRX_ERROR             	0x8000001E
+
+/// Error code for I2C Tx/Rx Error
+#define E_COMMS_I2C_TIMEOUT             	0x8000001F
+
+/// Error code for I2C Tx/Rx Error
+#define E_COMMS_INVALID_REQUEST            	0x80000020
+
+/// Error code for communication failure
+#define E_COMMS_FAILURE                     0xFFFFFFFF
+
+/// Indicates no session available at OPTIGA
+#define OPTIGA_LIB_NO_SESSION_AVAILABLE     0x0000
+
+/// OPTIGA Host Library API status - Success
+#define OPTIGA_LIB_SUCCESS           		0x0000
+
+/// OPTIGA Host Library API status - Busy
+#define OPTIGA_LIB_STATUS_BUSY       		0x0001
+
+/// OPTIGA Host Library API status - Failure
+#define OPTIGA_LIB_ERROR             		0xFFFF
+
+#endif /* _ERRORCODES_H_ */
+
+