1533 lines
80 KiB
C
1533 lines
80 KiB
C
|
/**
|
||
|
|
* Copyright (c) 2013 - 2020, Nordic Semiconductor ASA
|
||
|
|
*
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
*
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
||
|
|
* list of conditions and the following disclaimer.
|
||
|
|
*
|
||
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
||
|
|
* such product, must reproduce the above copyright notice, this list of
|
||
|
|
* conditions and the following disclaimer in the documentation and/or other
|
||
|
|
* materials provided with the distribution.
|
||
|
|
*
|
||
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived from this
|
||
|
|
* software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* 4. This software, with or without modification, must only be used with a
|
||
|
|
* Nordic Semiconductor ASA integrated circuit.
|
||
|
|
*
|
||
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
||
|
|
* engineered, decompiled, modified and/or disassembled.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
#ifndef BLE_GAP_CONN_H__
|
||
|
|
#define BLE_GAP_CONN_H__
|
||
|
|
|
||
|
|
/**@file
|
||
|
|
*
|
||
|
|
* @defgroup ble_gap_conn GAP Connectivity command request decoders and command response encoders
|
||
|
|
* @{
|
||
|
|
* @ingroup ser_conn_s130_codecs
|
||
|
|
*
|
||
|
|
* @brief GAP Connectivity command request decoders and command response encoders
|
||
|
|
*/
|
||
|
|
#include "ble_gap.h"
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_authenticate command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_authenticate_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle
|
||
|
|
* @param[out] pp_sec_params Pointer to pointer to security parameters.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_authenticate_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * const p_conn_handle,
|
||
|
|
ble_gap_sec_params_t * * const pp_sec_params);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_authenticate command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_authenticate_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_authenticate_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
#if defined(NRF_SD_BLE_API_VERSION) && (NRF_SD_BLE_API_VERSION <= 5)
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_adv_data_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_adv_data_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] pp_data Pointer to the buffer raw data to be placed in advertisement packet.
|
||
|
|
* @param[out] p_dlen Pointer to data length for p_data.
|
||
|
|
* @param[out] pp_sr_data Pointer to the buffer raw data to be placed in scan response packet.
|
||
|
|
* @param[out] p_srdlen Pointer to data length for p_sr_data.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_data_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint8_t * * const pp_data,
|
||
|
|
uint8_t * p_dlen,
|
||
|
|
uint8_t * * const pp_sr_data,
|
||
|
|
uint8_t * p_srdlen);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_adv_data_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_adv_data_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_data_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
#endif
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_adv_start command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_adv_start_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_adv_params Pointer to pointer to advertising parameters.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_start_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
#if NRF_SD_BLE_API_VERSION > 5
|
||
|
|
uint8_t * p_adv_handle
|
||
|
|
#else
|
||
|
|
ble_gap_adv_params_t * * const pp_adv_params
|
||
|
|
#endif
|
||
|
|
#if NRF_SD_BLE_API_VERSION >= 4
|
||
|
|
,uint8_t * p_conn_cfg_tag
|
||
|
|
#endif
|
||
|
|
);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_adv_start command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_adv_start_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_start_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_device_name_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_device_name_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_dev_name Pointer to pointer to device name buffer.
|
||
|
|
* @param[out] pp_dev_name_len Pointer to pointer to device name length location.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_device_name_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint8_t * * pp_dev_name,
|
||
|
|
uint16_t * * pp_dev_name_len);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_device_name_get command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_dev_name Pointer to device name buffer.
|
||
|
|
* @param[in] p_dev_name_len Length of device name buffer.
|
||
|
|
* @param[in] cpy_len Amount of data to be copied to device name buffer.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_device_name_get_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t const * const p_dev_name,
|
||
|
|
uint16_t * p_dev_name_len,
|
||
|
|
uint16_t cpy_len,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_conn_param_update command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_conn_param_update_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle.
|
||
|
|
* @param[out] pp_conn_params Pointer to pointer to connection parameters.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Invalid value for connection
|
||
|
|
* parameters field present.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_conn_param_update_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_conn_params_t * * const pp_conn_params);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_conn_param_update command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_conn_param_update_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_disconnect command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_disconnect_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[in] p_conn_handle Pointer to Connection Handle.
|
||
|
|
* @param[in] p_hci_status Pointer to HCI Status Code.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_disconnect_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * const p_conn_handle,
|
||
|
|
uint8_t * const p_hci_status);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_disconnect command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_disconnect_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_tx_power_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_tx_power_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[in] p_tx_power Pointer to TX power value.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_tx_power_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
#if NRF_SD_BLE_API_VERSION > 5
|
||
|
|
uint8_t * p_role, uint16_t * p_handle,
|
||
|
|
#endif
|
||
|
|
int8_t * p_tx_power);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_tx_power_set command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_tx_power_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_ppcp_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_ppcp_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_conn_params Pointer to pointer to connection parameters to be set.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Invalid value for connection
|
||
|
|
* parameters field present.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_ppcp_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_conn_params_t * * const pp_conn_params);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_ppcp_set command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_ppcp_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_ppcp_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_ppcp_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_conn_params Pointer to pointer to ble_gap_conn_params_t.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_ppcp_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
ble_gap_conn_params_t * * const pp_conn_params);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_ppcp_get command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_ppcp_get_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
* @param[in] p_conn_params Pointer to ble_gap_conn_params_t.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_ppcp_get_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
ble_gap_conn_params_t const * const p_conn_params);
|
||
|
|
|
||
|
|
|
||
|
|
uint32_t ble_gap_adv_stop_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint8_t * p_adv_handle);
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_adv_stop command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_stop_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_auth_key_reply command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_auth_key_reply_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle.
|
||
|
|
* @param[out] p_key_type Pointer to key type.
|
||
|
|
* @param[out] pp_key Pointer to pointer to buffer for incoming key.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_auth_key_reply_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
uint8_t * p_key_type,
|
||
|
|
uint8_t * * const pp_key);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_auth_key_reply command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_auth_key_reply_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_sec_params_reply command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_sec_params_reply_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle.
|
||
|
|
* @param[out] p_sec_status Pointer to security status.
|
||
|
|
* @param[out] pp_sec_params Pointer to pointer to security parameters structure.
|
||
|
|
* @param[out] pp_sec_keyset Pointer to pointer to security keyset structure.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Invalid value for connection
|
||
|
|
* parameters field present.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_sec_params_reply_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
uint8_t * p_sec_status,
|
||
|
|
ble_gap_sec_params_t * * const pp_sec_params,
|
||
|
|
ble_gap_sec_keyset_t * * const pp_sec_keyset);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_sec_params_reply command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in] p_sec_keyset Pointer to security keyset structure.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_sec_params_reply_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
ble_gap_sec_keyset_t * const p_sec_keyset);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_rssi_start command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_rssi_start_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle.
|
||
|
|
* @param[out] p_threshold_dbm Pointer to threshold in dBm.
|
||
|
|
* @param[out] p_skip_count Pointer to sample skip count.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_rssi_start_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
uint8_t * p_threshold_dbm,
|
||
|
|
uint8_t * p_skip_count);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_rssi_start command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
|
||
|
|
uint32_t ble_gap_rssi_start_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_rssi_stop command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_rssi_stop_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] conn_handle Pointer to connection handle.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
|
||
|
|
uint32_t ble_gap_rssi_stop_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * conn_handle);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_rssi_stop command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
|
||
|
|
uint32_t ble_gap_rssi_stop_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_appearance_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_appearance_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_appearance Pointer to pointer to uint16_t appearance.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_appearance_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint16_t * * const pp_appearance);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_appearance_get command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_appearance_get_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
* @param[in] p_appearance Pointer to uint16_t appearance.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_appearance_get_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
uint16_t const * const p_appearance);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_appearance_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_tx_power_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] buf_len Length (in bytes) of the packet.
|
||
|
|
* @param[out] p_appearance Pointer to the appearance.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_appearance_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t buf_len,
|
||
|
|
uint16_t * const p_appearance);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_appearance_set command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_appearance_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_sec_info_reply command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_sec_info_reply_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of the packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to the Connection Handle.
|
||
|
|
* @param[out] pp_enc_info Pointer to pointer to Encryption Information.
|
||
|
|
* @param[out] pp_id_info Pointer to pointer to ID Information.
|
||
|
|
* @param[out] pp_sign_info Pointer to pointer to Signing Information.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_sec_info_reply_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_enc_info_t * * const pp_enc_info,
|
||
|
|
ble_gap_irk_t * * const pp_id_info,
|
||
|
|
ble_gap_sign_info_t * * const pp_sign_info);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_sec_info_reply command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_sec_info_reply_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_device_name_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_device_name_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of the packet.
|
||
|
|
* @param[out] pp_write_perm Pointer to pointer to write permissions filed.
|
||
|
|
* @param[out] pp_dev_name Pointer to pointer to device name string.
|
||
|
|
* @param[out] p_dev_name_len Pointer to device name string length.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_device_name_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_conn_sec_mode_t * * const pp_write_perm,
|
||
|
|
uint8_t * * const pp_dev_name,
|
||
|
|
uint16_t * const p_dev_name_len);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_device_name_set command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_device_name_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_conn_sec_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_conn_sec_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to Connection Handle.
|
||
|
|
* @param[out] pp_conn_sec Pointer to pointer to @ref ble_gap_conn_sec_t to be filled by
|
||
|
|
* the SoftDevice.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_conn_sec_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_conn_sec_t * * const pp_conn_sec);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_conn_sec_get command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_conn_sec_get_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_conn_sec Pointer to @ref ble_gap_conn_sec_t to be encoded.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_conn_sec_get_rsp_enc(uint32_t return_code,
|
||
|
|
ble_gap_conn_sec_t * const p_conn_sec,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
#ifndef S112
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_scan_stop command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_scan_stop_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_connect command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_connect_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_addr Pointer to pointer to peer address @ref ble_gap_addr_t.
|
||
|
|
* @param[out] pp_scan_params Pointer to pointer to @ref ble_gap_scan_params_t.
|
||
|
|
* @param[out] pp_conn_params Pointer to pointer to @ref ble_gap_conn_params_t.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_connect_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_addr_t * * const pp_addr,
|
||
|
|
ble_gap_scan_params_t * * const pp_scan_params,
|
||
|
|
ble_gap_conn_params_t * * const pp_conn_params
|
||
|
|
#if NRF_SD_BLE_API_VERSION >= 4
|
||
|
|
,uint8_t * p_conn_cfg_tag
|
||
|
|
#endif
|
||
|
|
);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_connect command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_connect_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_connect_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_scan_start command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_scan_start_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_scan_params Pointer to pointer to @ref ble_gap_scan_params_t.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_scan_start_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_scan_params_t * * const pp_scan_params
|
||
|
|
#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5
|
||
|
|
,ble_data_t * * const pp_adv_report_buffer
|
||
|
|
#endif
|
||
|
|
);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_scan_start command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_scan_start_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_scan_start_rsp_enc(uint32_t return_code,
|
||
|
|
#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5
|
||
|
|
ble_data_t *p_ble_data,
|
||
|
|
#endif
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_connect_cancel command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_connect_cancel_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_encrypt command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_encrypt_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer connection_handle.
|
||
|
|
* @param[out] pp_master_id Pointer to pointer to @ref ble_gap_master_id_t.
|
||
|
|
* @param[out] pp_enc_info Pointer to pointer to @ref ble_gap_enc_info_t.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
|
||
|
|
uint32_t ble_gap_encrypt_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint16_t * const p_conn_handle,
|
||
|
|
ble_gap_master_id_t ** const pp_master_id,
|
||
|
|
ble_gap_enc_info_t ** const pp_enc_info);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_encrypt command response.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_encrypt_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_rssi_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_rssi_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[in] p_conn_handle Connection handle.
|
||
|
|
* @param[out] pp_rssi Pointer to pointer to RSSI value.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_rssi_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
int8_t * * const pp_rssi
|
||
|
|
#if NRF_SD_BLE_API_VERSION > 5
|
||
|
|
,uint8_t * * const pp_ch_index
|
||
|
|
#endif
|
||
|
|
);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_rssi_get command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_rssi_get_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
* @param[in] p_rssi RSSI value.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_rssi_get_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
int8_t * p_rssi
|
||
|
|
#if NRF_SD_BLE_API_VERSION > 5
|
||
|
|
,uint8_t * p_ch_index
|
||
|
|
#endif
|
||
|
|
);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_keypress_notify command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_keypress_notify_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Connection handle.
|
||
|
|
* @param[out] p_kp_not Pointer kp_not value.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_keypress_notify_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
uint8_t * p_kp_not);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_keypress_notify command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_keypress_notify_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_keypress_notify_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_lesc_dhkey_reply command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_lesc_dhkey_reply_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Connection handle.
|
||
|
|
* @param[out] pp_dhkey Pointer to pointer to dhkey struct.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_lesc_dhkey_reply_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_lesc_dhkey_t * * pp_dhkey);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_lesc_dhkey_reply command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_lesc_dhkey_reply_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_lesc_dhkey_reply_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_lesc_oob_data_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_lesc_oob_data_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Connection handle.
|
||
|
|
* @param[out] pp_oobd_own Pointer to pointer to own OOB data struct.
|
||
|
|
* @param[out] pp_oobd_peer Pointer to pointer to peer OOB data struct.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_lesc_oob_data_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_lesc_oob_data_t * * pp_oobd_own,
|
||
|
|
ble_gap_lesc_oob_data_t * * pp_oobd_peer);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_lesc_oob_data_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_lesc_oob_data_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_lesc_oob_data_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_lesc_oob_data_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_lesc_oob_data_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Connection handle.
|
||
|
|
* @param[out] pp_pk_own Pointer to pointer to PK.
|
||
|
|
* @param[out] pp_oobd_own Pointer to pointer to own OOB data struct.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_lesc_oob_data_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_lesc_p256_pk_t * * pp_pk_own,
|
||
|
|
ble_gap_lesc_oob_data_t * * pp_oobd_own);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_lesc_oob_data_get command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_lesc_oob_data_get_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[in] p_oobd_own Pointer to OOB data.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_lesc_oob_data_get_rsp_enc(uint32_t return_code,
|
||
|
|
ble_gap_lesc_oob_data_t * p_oobd_own,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_addr_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_addr_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] pp_address Pointer to pointer to address.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_addr_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
ble_gap_addr_t * * const pp_address);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_addr_get command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_addr_get_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
* @param[in] p_address Pointer to @ref ble_gap_addr_t address
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_addr_get_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
ble_gap_addr_t const * const p_address);
|
||
|
|
|
||
|
|
/** @brief Decodes @ref sd_ble_gap_addr_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_addr_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] pp_addr Pointer to pointer to the address structure.
|
||
|
|
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_addr_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_addr_t * * const pp_addr);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_addr_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_addr_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_addr_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/** @brief Decodes @ref sd_ble_gap_privacy_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_privacy_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] pp_privacy_params Pointer to pointer to the privacy settings structure.
|
||
|
|
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_privacy_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_privacy_params_t * * const pp_privacy_params);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_privacy_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_privacy_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_privacy_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/** @brief Decodes @ref sd_ble_gap_privacy_get command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_privacy_get_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] pp_privacy_params Pointer to pointer to the privacy settings structure.
|
||
|
|
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_privacy_get_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
ble_gap_privacy_params_t * * const pp_privacy_params);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_privacy_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_privacy_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
* @param[out] p_privacy_params Pointer to privacy settings structure.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_privacy_get_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
ble_gap_privacy_params_t const * const p_privacy_params);
|
||
|
|
|
||
|
|
/** @brief Decodes @ref sd_ble_gap_whitelist_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_whitelist_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] ppp_wl_addrs Pointer to a whitelist of peer addresses.
|
||
|
|
* @param[out] p_len Pointer to a length of the whitelist.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_whitelist_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_addr_t * * * const ppp_wl_addrs,
|
||
|
|
uint8_t * const p_len);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_whitelist_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_whitelist_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_whitelist_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/** @brief Decodes @ref sd_ble_gap_device_identities_set command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_device_identities_set_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] ppp_id_keys Pointer to an array of peer identity addresses and peer IRKs.
|
||
|
|
* @param[out] ppp_local_irks Pointer to an array of local IRKs.
|
||
|
|
* @param[out] p_len Pointer to a length of the device identity list.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_device_identities_set_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
ble_gap_id_key_t * * * const ppp_id_keys,
|
||
|
|
ble_gap_irk_t * * * const ppp_local_irks,
|
||
|
|
uint8_t * const p_len);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_device_identities_set command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_device_identities_set_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_device_identities_set_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
#if NRF_SD_BLE_API_VERSION >= 4 && !defined(S112)
|
||
|
|
/** @brief Decodes @ref sd_bble_gap_data_length_update command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_data_length_update_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of request packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to a connection handle.
|
||
|
|
* @param[out] pp_dl_params Pointer to pointer to a data length params structure.
|
||
|
|
* @param[out] pp_dl_limitation Pointer to pointer to a data length limitation structure.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_data_length_update_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint16_t * p_conn_handle,
|
||
|
|
ble_gap_data_length_params_t * * const pp_dl_params,
|
||
|
|
ble_gap_data_length_limitation_t * * const pp_dl_limitation);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_data_length_update command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_data_length_update_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_data_length_update_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
ble_gap_data_length_limitation_t const * const p_dl_limitation);
|
||
|
|
#endif
|
||
|
|
#if NRF_SD_BLE_API_VERSION >= 5
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_phy_update command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_phy_update_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle
|
||
|
|
* @param[out] pp_gap_phys Pointer to pointer to the struct.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_phy_update_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint16_t * const p_conn_handle,
|
||
|
|
ble_gap_phys_t * * const pp_gap_phys);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_phy_update command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_phy_update_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_phy_update_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if NRF_SD_BLE_API_VERSION >= 6
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_adv_set_configure command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_adv_set_configure_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_conn_handle Pointer to connection handle
|
||
|
|
* @param[out] pp_adv_handle Pointer to pointer to the struct.
|
||
|
|
* @param[out] pp_adv_data Pointer to pointer to the struct.
|
||
|
|
* @param[out] pp_adv_params Pointer to pointer to the struct.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_set_configure_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint16_t packet_len,
|
||
|
|
uint8_t * * const pp_adv_handle,
|
||
|
|
ble_gap_adv_data_t **const pp_adv_data,
|
||
|
|
ble_gap_adv_params_t **const pp_adv_params);
|
||
|
|
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_adv_set_configure command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_adv_set_configure_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
* @param[in] p_adv_handle Pointer to the field to be encoded.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_adv_set_configure_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len,
|
||
|
|
ble_gap_adv_data_t * p_ble_adv_data,
|
||
|
|
uint8_t const * const p_adv_handle);
|
||
|
|
|
||
|
|
#ifndef S112
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_qos_channel_survey_start command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_qos_channel_survey_start_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
* @param[out] p_interval_us Pointer to interval.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_qos_channel_survey_start_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len,
|
||
|
|
uint32_t * const p_interval_us);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_qos_channel_survey_start command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_qos_channel_survey_start_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_qos_channel_survey_start_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
|
||
|
|
/**@brief Decodes @ref sd_ble_gap_qos_channel_survey_stop command request.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_qos_channel_survey_stop_rsp_enc for response encoding.
|
||
|
|
*
|
||
|
|
* @param[in] p_buf Pointer to beginning of command request packet.
|
||
|
|
* @param[in] packet_len Length (in bytes) of response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Decoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
|
||
|
|
* @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_qos_channel_survey_stop_req_dec(uint8_t const * const p_buf,
|
||
|
|
uint32_t packet_len);
|
||
|
|
|
||
|
|
/**@brief Encodes @ref sd_ble_gap_qos_channel_survey_stop command response.
|
||
|
|
*
|
||
|
|
* @sa @ref ble_gap_qos_channel_survey_stop_req_dec for request decoding.
|
||
|
|
*
|
||
|
|
* @param[in] return_code Return code indicating if command was successful or not.
|
||
|
|
* @param[out] p_buf Pointer to buffer where encoded data command response will be
|
||
|
|
* returned.
|
||
|
|
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
|
||
|
|
* \c out: Length of encoded command response packet.
|
||
|
|
*
|
||
|
|
* @retval NRF_SUCCESS Encoding success.
|
||
|
|
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
|
||
|
|
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
|
||
|
|
*/
|
||
|
|
uint32_t ble_gap_qos_channel_survey_stop_rsp_enc(uint32_t return_code,
|
||
|
|
uint8_t * const p_buf,
|
||
|
|
uint32_t * const p_buf_len);
|
||
|
|
#endif //!defined(S112)
|
||
|
|
#endif
|
||
|
|
/** @} */
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif
|