1.阻抗显示 2.解码器启动配置文件更改

ZBD_IIIDL_S_Project/DependFile/QML/Ssvep.qml

@@ -223,7 +223,8 @@ Item {
         id: connectTimer
         interval: 3*1000;
         onTriggered: {
-            clientSocket.connected();
+            clientSocket.disconnectFromHost();
+            clientSocket.connectToHost();
         }
     }
 
@@ -241,19 +242,19 @@ Item {
         {
             stimulateTimer.stop()
         }
-        if(index === "2")
+        if(index === "0")
         {
             ssvepTenHzTimer.start();
             hitTimer.start();
             bci.startTrain(0,responseTime-2);
              hitIndex = 0;
-        }else if(index === "0")
+        }else if(index === "1")
         {
             ssvepTwelveHzTimer.start();
             hitTimer.start();
             bci.startTrain(1,responseTime-2);
             hitIndex = 1;
-        }else if(index === "1")
+        }else if(index === "2")
         {
             ssvepFifteenHzTimer.start();
             hitTimer.start();
@@ -298,6 +299,13 @@ Item {
     {
         bci.initTrain();
         clientSocket.connectToHost();
+
+        var channels = bci.getChannels();
+        for(var i=0;i<channels.length;i++)
+        {
+            console.log("12344",channels[i])
+
+        }
     }
 
 
@@ -314,19 +322,23 @@ Item {
                 //判断是不是阻抗数据
                 var parts = cmd.split(":");
                 //通道序列号
-                var channels = [0,1,2,3,4,5,6,7]
+                var channels = bci.getChannels();
                 for(var i=0;i<channels.length;i++)
                 {
+                    console.info(channels[i],parts[channels[i]],popimpedance.minImpedance,popimpedance.maxImpedance);
                     if(channels[i] < parts.length)
                     {
                         if(Number(parts[channels[i]]) < popimpedance.minImpedance)
                         {
+                             console.info("green");
                              popimpedance.colorChange(i,green)
                         }else if(Number(parts[channels[i]]) > popimpedance.maxImpedance)
                         {
+                            console.info("red");
                             popimpedance.colorChange(i,red)
                         }else
                         {
+                            console.info("yellow");
                             popimpedance.colorChange(i,yellow)
                         }
                     }
@@ -339,7 +351,7 @@ Item {
         }
         onConnected:
         {
-            console.info("Client socket connected");
+            console.info("Client socket connected 111111");
             bConnect = true;
             bci.deviceStatus(true);
             if(connectTimer.running)
@@ -1033,6 +1045,14 @@ Item {
                 anchors.fill: parent
                 onClicked: {
                     popimpedance.show()
+                    popimpedance.colorChange(0,green)
+                    popimpedance.colorChange(1,green)
+                    popimpedance.colorChange(2,green)
+                    popimpedance.colorChange(3,green)
+                    popimpedance.colorChange(4,green)
+                    popimpedance.colorChange(5,green)
+                    popimpedance.colorChange(6,green)
+                    popimpedance.colorChange(7,green)
                     popimpedance.colorChange(9,green)
                     popimpedance.colorChange(10,green)
                 }
@@ -1041,8 +1061,8 @@ Item {
     }
     PopImpedance{
         id:popimpedance
-        property int maxImpedance: 6
+        property int maxImpedance: 15*100
-        property int minImpedance: 3
+        property int minImpedance: 10*100
         Timer {
             id: impedanceTimer
             interval: 1000
@@ -1055,10 +1075,14 @@ Item {
         {
             if(visible)
             {
-                impedanceTimer.start();
+                //impedanceTimer.start();
+                //开启阻抗
+                clientSocket.writeBytes(getIntArr("3"));
             }else
             {
-                impedanceTimer.stop();
+                //impedanceTimer.stop();
+                //关闭阻抗
+                clientSocket.writeBytes(getIntArr("4"));
             }
         }
     }

ZBD_IIIDL_S_Project/Src/TrainManager/BCIManager.cpp

@@ -2,11 +2,13 @@
 #include <QFile>
 #include <QApplication>
 #include <QDebug>
+#include <QSettings>
+#include <QTextCodec>
 
 BCIManager::BCIManager(QObject *parent)
     : QObject{parent}
 {
-
+    readConfigFile();
 }
 
 bool BCIManager::startLinkerPrograme()
@@ -38,7 +40,7 @@ bool BCIManager::startLinkerPrograme()
     //启动进程
     //QString strCmd =  QApplication::applicationDirPath().append("/BCILinker/SunnyLinkTool/") + strContent;
 
-    QString strCmd =  QString("./") + strContent;
+    QString strCmd =  QString("./%1 -t 1 -c %2 -p %3").arg(m_strExe).arg(m_strIp).arg(m_nPort);
 
     qDebug() << strCmd;
     if(nullptr == m_pCmd)
@@ -47,7 +49,7 @@ bool BCIManager::startLinkerPrograme()
         connect(m_pCmd, &QProcess::readyReadStandardOutput, this, &BCIManager::slotLinkerProgrameReadyReadStandardOutput);
         connect(m_pCmd, &QProcess::readyReadStandardError, this, &BCIManager::slotLinkerProgrameReadyReadStandardError);
     }
-    m_pCmd->start(strCmd);
+    m_pCmd->startDetached(strCmd);
 }
 
 void BCIManager::initTrain()
@@ -130,6 +132,7 @@ void BCIManager::slotTrainTimer()
 
 void BCIManager::startTrain(int Part, int Time)
 {
+    qDebug() << "33333333333333333333";
     initTrain();
     if(trainTimer->isActive())
     {
@@ -188,3 +191,85 @@ void BCIManager::deviceStatus(bool bConnected)
 {
     emit signalDeviceStatus(bConnected);
 }
+
+QVariantList BCIManager::getChannels()
+{
+    QVariantList lstChannels;
+    for(int i = 0; i < m_vecChannels.length(); i++)
+    {
+        lstChannels.push_back(m_vecChannels.at(i));
+    }
+    return lstChannels;
+}
+
+QString BCIManager::getExe()
+{
+    return m_strExe;
+}
+
+QString BCIManager::getIp()
+{
+    return m_strIp;
+}
+
+int BCIManager::getPort()
+{
+    return m_nPort;
+}
+
+void BCIManager::readConfigFile()
+{
+    //文件路径+文件名
+    QString fileName = QCoreApplication::applicationDirPath() + "/DevConfig.ini";
+    //创建配置目标，输入文件路径，文件格式
+    QSettings *setting = new QSettings(fileName, QSettings::IniFormat);
+    //设置文件编码，配置文件中使用中文时，这是必须的，否则乱码
+    setting->setIniCodec(QTextCodec::codecForName("UTF-8"));
+    // 判断文件是否存在
+    if(QFile::exists(fileName)) // 文件存在，读出配置项
+    {
+        // 这里的setting->value的第二参数，是配置项缺省值，即当读取的配置项不存在时，读取该值
+        // User是配置组，name和age是配置项
+        m_strExe = setting->value("Comm/Exe", "decoder_main.exe").toString();
+        m_strIp = setting->value("Comm/Ip", "192.168.1.111").toString();
+        m_nPort = setting->value("Comm/Port", 5086).toInt();
+        m_vecChannels.push_back(setting->value("Channels/Channel_0", 13).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_1", 14).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_2", 15).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_3", 27).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_4", 28).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_5", 32).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_6", 34).toInt());
+        m_vecChannels.push_back(setting->value("Channels/Channel_7", 58).toInt());
+        m_nSamplerate = setting->value("Dev/Samplerate", 250).toUInt();
+    }
+    else   // 文件不存在，写入配置项，生成配置文件
+    {
+        setting->value("Comm/Exe", "decoder_main.exe").toString();
+        m_strExe = "decoder_main.exe";
+        setting->setValue("Comm/Ip", "192.168.1.111");
+        m_strIp = "192.168.1.111";
+        setting->setValue("Comm/Port", 5086);
+        m_nPort = 5086;
+        setting->setValue("Channels/Channel_0", 13);
+        m_vecChannels.push_back(13);
+        setting->setValue("Channels/Channel_1", 14);
+        m_vecChannels.push_back(14);
+        setting->setValue("Channels/Channel_2", 15);
+        m_vecChannels.push_back(15);
+        setting->setValue("Channels/Channel_3", 27);
+        m_vecChannels.push_back(27);
+        setting->setValue("Channels/Channel_4", 28);
+        m_vecChannels.push_back(28);
+        setting->setValue("Channels/Channel_5", 32);
+        m_vecChannels.push_back(32);
+        setting->setValue("Channels/Channel_6", 34);
+        m_vecChannels.push_back(34);
+        setting->setValue("Channels/Channel_7", 58);
+        m_vecChannels.push_back(58);
+        setting->setValue("Dev/Samplerate", 250);
+        m_nSamplerate = 250;
+        setting->sync();
+    }
+    delete setting;
+}

ZBD_IIIDL_S_Project/Src/TrainManager/BCIManager.h

@@ -35,6 +35,17 @@ public:
     Q_INVOKABLE void continueTrain();
     Q_INVOKABLE void deviceStatus(bool bConnected);
 
+    Q_INVOKABLE QVariantList getChannels();
+
+    QString getExe();
+
+    QString getIp();
+
+    int getPort();
+
+private:
+    void readConfigFile();
+
 private slots:
     //Linker程序的标准输出
     void slotLinkerProgrameReadyReadStandardOutput();
@@ -59,6 +70,12 @@ private:
 
     int heartCount = 0; //心跳次数，用于检测通信
     ST_BicycleParam m_st_bicycleParam;  //启动参数
+
+    QString m_strIp;
+    int m_nPort;
+    QVector<int> m_vecChannels;
+    QString m_strExe;
+    uint m_nSamplerate;
 };
 
 #endif // BCIMANAGER_H

ZBD_IIIDL_S_Project/Src/TrainManager/QmlTcpSocket/TcpSocket.cpp

@@ -26,7 +26,8 @@
 
 #include <QHostAddress>
 
-namespace QMLTcpSockets{
+namespace QMLTcpSockets
+{
 
     TcpSocket::TcpSocket(QQuickItem *parent):
         QQuickItem(parent),
@@ -49,11 +50,13 @@ TcpSocket::TcpSocket(QIntPtr* socketDescriptor, QQuickItem* parent):
         port = socket.peerPort();
     }
 
-TcpSocket::~TcpSocket(){
+    TcpSocket::~TcpSocket()
+    {
         socket.flush();
     }
 
-void TcpSocket::setSocketDescriptor(QIntPtr* socketDescriptor){
+    void TcpSocket::setSocketDescriptor(QIntPtr *socketDescriptor)
+    {
         socket.flush();
         socket.disconnectFromHost();
 
@@ -61,13 +64,15 @@ void TcpSocket::setSocketDescriptor(QIntPtr* socketDescriptor){
         socketDescriptor->deleteLater();
 
         QString peer = socket.peerAddress().toString();
-    if(this->peer != peer){
+        if(this->peer != peer)
+        {
             this->peer = peer;
             emit peerChanged();
         }
 
         quint16 port = socket.peerPort();
-    if(this->port != port){
+        if(this->port != port)
+        {
             this->port = port;
             emit portChanged();
         }
@@ -75,77 +80,103 @@ void TcpSocket::setSocketDescriptor(QIntPtr* socketDescriptor){
         emit connected();
     }
 
-void TcpSocket::setSocketOption(int option, QVariant value){
+    void TcpSocket::setSocketOption(int option, QVariant value)
+    {
         socket.setSocketOption((QAbstractSocket::SocketOption)option, value);
     }
 
-void TcpSocket::setPeer(QString peer){
+    void TcpSocket::setPeer(QString peer)
-    if(peer != this->peer){
+    {
+        if(peer != this->peer)
+        {
             if(socket.state() != TcpSocketEnums::UnconnectedState)
+            {
                 qWarning() << "TcpSocket::setPeer(): Can only set peer while disconnected.";
-        else{
+            }
+            else
+            {
                 this->peer = peer;
                 emit peerChanged();
             }
         }
     }
 
-void TcpSocket::setPort(int port){
+    void TcpSocket::setPort(int port)
-    if(port < 0){
+    {
+        if(port < 0)
+        {
             qWarning() << "TcpSocket::setPort(): port given was negative, setting to 0.";
             port = 0;
         }
-    else if(port > 0xFFFF){
+        else if(port > 0xFFFF)
+        {
             qWarning() << "TcpSocket::setPort(): port given was larger than 65535, setting to 65535.";
             port = 0xFFFF;
         }
 
-    if(port != this->port){
+        if(port != this->port)
+        {
             if(socket.state() != TcpSocketEnums::UnconnectedState)
+            {
                 qWarning() << "TcpSocket::setPort(): Can only set port while disconnected.";
-        else{
+            }
+            else
+            {
                 this->port = port;
                 emit portChanged();
             }
         }
     }
 
-void TcpSocket::connectToHost(){
+    void TcpSocket::connectToHost()
+    {
         socket.connectToHost(peer, port);
     }
 
-void TcpSocket::disconnectFromHost(){
+    void TcpSocket::disconnectFromHost()
+    {
         socket.disconnectFromHost();
     }
 
-void TcpSocket::emitErrorAsInt(QAbstractSocket::SocketError socketError){
+    void TcpSocket::emitErrorAsInt(QAbstractSocket::SocketError socketError)
+    {
         emit error(socketError);
     }
 
-void TcpSocket::publish(){
+    void TcpSocket::publish()
+    {
         QList<int> list;
         QByteArray receivedBytes = socket.readAll();
         for(char c : receivedBytes)
+        {
             list << (int)(*((unsigned char *)(&c)));
+        }
         emit bytesReceived(list);
     }
 
-bool TcpSocket::writeBytes(QList<int> bytes){
+    bool TcpSocket::writeBytes(QList<int> bytes)
+    {
         QByteArray container;
-    for(int b : bytes){
+        for(int b : bytes)
-        if(b < 0 || b > 0xFF){
+        {
+            if(b < 0 || b > 0xFF)
+            {
                 qWarning() << "TcpSocket::writeBytes(): bytes contain integer not in [0x00,0xFF], not writing";
                 return false;
             }
             else
+            {
                 container.append((char)b);
             }
+        }
 
         int numBytesToWrite = container.size();
         const char *bytesRaw = container.constData();
-    while(numBytesToWrite > 0){
+        while(numBytesToWrite > 0)
+        {
             int bytesWritten = socket.write(bytesRaw, numBytesToWrite);
-        if(bytesWritten < 0){
+            if(bytesWritten < 0)
+            {
                 qWarning() << "TcpSocket::writeBytes(): Bytes were not written: " << socket.errorString();
                 return false;
             }